Molding Machine Operator

Major Functions:

Operates the machines and equipment used in the manufacturing of products and will work with other employees to effectively meet or exceed expectations for product quality and production rates.

Essential duties and responsibilities are as follows, other duties may be assigned.

  • Remove products from the press and process them for shipment or transfer to finishing department
  • Measure products to ensure compliance with customer specifications
  • Package and label products as directed in job packet (work Instructions)
  • Operate machinery and equipment used in the manufacture of products
  • Read and follow operating manuals; work instructions, master samples, process alerts and procedures
  • Follow established documentation for producing manufactured product
  • Perform in-process inspection of all parts and/or assemblies in accordance with the requirements stated in the job packet (work instructions) or as otherwise stated on drawings or master sample
  • Perform the essential functions of the job within acceptable OSHA and safety/environmental regulations, quality, productivity and performance standards as outlined in plant policies, procedures and applicable work instructions
  • Perform SPC, visual and gauge inspection and complete required forms
  • Involvement in our Continuous Improvement and Safety initiatives
  • Clean the machine and surrounding work areas to ensure the housekeeping and safety of the plant
  • Operate machines as assigned and assist co-workers at other workstations as needed
  • Perform any work deemed necessary by the supervisor
  • Identify, properly contain, and label scrap/purging
  • Perform any secondary processes
  • Perform rework as necessary
  • Clean work cell during shift and before shift change
  • Follow all safety policies and procedures
  • Live our core values

Qualifications:  To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education/Experience:

  • High school Diploma and or G.E.D. required
  • Ability to understand written and verbal communication
  • Ability to lift 50 pounds
  • Manual and finger dexterity
  • Demonstrated the basic knowledge of injection molding process and ability to learn the inner working of the molding process
  • Must be able to work extended hours and/or overtime as required
  • Must be able to participate in job development training
  • Strong attention to detail and accuracy
  • Strong customer focus

Please e-mail resume to: hr@dekalbplastics.com or stop by 550 W. Main St., Butler, IN to fill out an application.

Maintenance Technician

Candidate will perform all mechanical repairs on PPS production equipment, facility and grounds.

ESSENTIAL DUTIES:

  • Ability to meet physical demands and perform the essential job functions within the work environment identified in this job description.
  • Perform daily inspections and routine checks on production equipment and facility.
  • Communicate on operator levels to help with trouble shooting and improvements.
  • Troubleshoot, diagnose and recommend repairs needed or scope of work required for repairs on production equipment to help with production scheduling and downtime reduction.
  • Perform all mechanical repairs on production equipment that is within PPS internal capabilities.
  • Safely operate all tool room equipment (mill, lathe, grinders) as needed for repairs and improvements.
  • Capable of welding with ARC and M.I.G. Ability to safely use cutting torch and plasma cutter.
  • Safely perform minor electrical repairs on production equipment.
  • Communicate with internal electricians and outside electrical contractors on any electrical issues or projects.
  • Read blueprints, schematic drawings and manuals to determine work process.
  • Help to develop P.M. procedures and review documentation on new equipment installs for future maintenance requirements and spare parts.
  • Interact with engineering and management to recommend machinery upgrades or process changes to better maintain equipment or improve serviceability.
  • Demonstrate safe general rigging practices when using auxiliary lifting equipment on Hilo.
  • Must be capable of working from elevated heights such as roof, platforms, man lifts or ladders both inside and outdoors.
  • Install machinery and equipment according to layout plans, blueprints, or other drawings using hoists, lift trucks, hand tools, and power tools that fits with in PPS capabilities.
  • Work with outside mechanical, electrical or fabrication contractors as needed when scope of work is outside of PPS capabilities.

EDUCATION & EXPERIENCE REQUIREMENTS:

  • High school diploma
  • 3+ years experience in machine repair

SKILLS & KNOWLEDGE REQUIRED:

  • Valid Drivers License
  • Mathematical and mechanical aptitude
  • Ability to read drawings, blueprints, exploded views and schematics
  • Working knowledge of hydraulics, pneumatics and all parts of machine repair
  • Torches, MIG and ARC welding
  • Fabrications applications experience
  • Basic machining skills using Mill, Lathe, Grinders and small shop equipment
  • Good communication skills
  • Ability to work independently and in a team atmosphere
  • Proven attention to detail and accuracy
  • Demonstrated safety consciousness

Please send Resumes to Marissa Clugston Email: Marissa.clugston@padnos.com

CNAs

New Haven Center, located in New Haven, (Allen County) Indiana is currently hiring CNAs full time and part time all shifts.

We are offering a $1,000 sign on bonus.

1201 Daly Drive

New Haven, IN  46774

Please apply at www.genesiscareers.jobs, or email resume/interest to Joyce.Sherick@Genesishcc.com or call 800-832-6266.

Kelly Services Fort Wayne positions

Kelly

Services                                   We’re Hiring!

                                                                                                                 JOIN OUR T E A M


 

       General Labor 

 

  

Columbia City, IN

Operations Supervisor 

1st and 2nd shift

$22.00/hour

Direct Hire

Fort Wayne, IN

 

Imaging Specialist

$11.50/hour

1st shift

 

Printing Press Operator

1st shift — $14.16/hour

 

Manufacturing- South Ft. Wayne

$11.00/hour

Various shifts

 

Data Processing Specialist

 $12.59/hour

1st shift

 

Huntington

Logistics Specialist

$13/hour

1st shift

 Phone 260-484-2640 or Email 2516@kellyservices.com

www.kellyservices.com to see a complete job posting

Kelly Services Local area positions

Kelly                                           WE’RE HIRING!

Services

                                                                           JOIN OUR

                                                                  T E A M


Job Opportunities

Kendallville, IN

HandWork

1st  shift –

$12.00/hour

Temp to Hire

 

Saw Machine Operator

1st shift –

$12.00/hour

Temp to Hire

 

Sheet Catcher

2nd shift

$12.30/hour

Temp to Hire

 

Atom Die Cutter

2nd and 3rd shift-

$12.30/hour- 2nd

$12.25/hour – 3rd

Temp to Hire

 

Garrett, IN

Warehouse Product Tester and Packer

Hours: 9:30 am – 6 pm M-F       

$10.00/hour

Temp to Hire     

 

Customer Service Tech Support

M-F  11:30am – 8pm

$11.00/hour

Temp to Hire

 

 

Auburn, Garrett, Kendallville, IN

Maintenance Techs

All shifts

Pay based on experience

Temp to hire and Direct Hire

 

Fremont, IN

CNC

2nd shift and 3rd shift

$14.50/hour

Tempt to Hire

 

Butler, IN

Machine Operators

All shifts

$13.00/Hour

Temp to Hire

 

Plastic Injection Mold Operator

8 and 12 hour shifts

1st shift –  $11.50/Hour

2nd and 3rd shift  – $12.00/hour

Temp to Hire

 

Ashley, IN

Electronic Assembly

All shifts

$11.00/hour

Long term assignment

 

 

Auburn, IN

Parts Loader 

1st shift

$11.50/hour 

Temp to  Hire   

 

Packers

1st shift

$11.00/hour

Long Term Assignment

 

Angola, IN

Packers

 All Shifts

$10.50/hour

About 6 week project

 

 

Phone 260-484-2640  or Email 2516@kellyservices.com

www.kellyservices.com to see complete job posting